Skip to Content
Specialist in high-end audio
Independent, tailored advice
Carefully shipped

IsoTek V5 Titan 3-way mains filter

The IsoTek V5 Titan is a high-current power cleaner with 3 independent high-current outputs (16 A, 3,680 W in total) for power amplifiers, subwoofers and active loudspeakers, in a half-width housing of 220 x 147 x 350 mm. RFI reduction 85 dB.

About the IsoTek V5 Titan

IsoTek's iconic Titan high-current power-cleaning system has been considerably improved and has undergone a striking restyling. The V5 model is not only groundbreaking in its visual design — it looks as if it has been carved from a single block of aluminium — but also includes the latest technical innovations from a leading brand in the specialist field of power supply systems for audio and AV.

The V5 Titan is a dedicated high-current power-cleaning and distribution system that delivers absolute power. The product is 220 mm wide, 350 mm deep and 147 mm high. It has 3 independent outlets, each with its own dedicated power-cleaning network, so Titan consists of three low-impedance, high-current power-cleaning networks in a single half-width housing. Both differential- and common-mode mains noise are enormously reduced. Cross-contamination of connected components is also limited thanks to the multiple mains-cleaning stages for each socket. Most mains filters join outlets together, with each filter working in series. This is not ideal, as cross-contamination by differential-mode mains noise arising from your connected electronics will occur from one outlet to another.

The electrical architecture and design of the V5 Titan are of a very high standard. The PCB design and topology have been revised, and it now offers more than 50% improved current capacity and lower resistance. Unique critical (custom) components have better overall tolerances with better inductance and power handling. The new circuit offers twice the inductance, with 80% higher current conduction, for a more open soundstage, micro-dynamics and detail with more immediate timing. A drastic improvement in DCR (Direct Current Resistance) has been implemented throughout the design, since IsoTek's aim is to bring the DC resistance as close as possible to the ideal value of 0 Ohm. As a result, the performance of the V5 Titan far exceeds that of its predecessors.

Thanks to the technological improvements, the V5 Titan can deliver full power for an unlimited current supply, of course within the limits and regulations set by the energy suppliers. In general, IsoTek provides an outlet with extremely low impedance and low DCR for power amplifiers or high-power electronics, completely ruling out (within the concepts of power filtering) any possibility of current limitation and increasing the dynamic range. This is because the impedance of the chain back to the power station is much greater. When the power is polluted, the dynamic range becomes smaller — just as birdsong is drowned out by all the traffic noise. It is not that the birdsong cannot be heard, but it is drowned out by unnecessary background noise.

IsoTek's absolute power circuits offer greater perceived dynamics. Dynamic range in music is the ratio between the loudest and quietest sound produced, combined with a lowered noise floor — the power equation or, in other words, dynamic range. To maintain high current capacity and exceptionally low resistance on the circuit board, up to eight times the usual standard of copper is used before pure silver is applied.

Source component filters have a moderate amount of DCR to support the filter designs. This DCR provides better separation between equipment and thus helps against the enormous amount of differential-mode noise produced by connected equipment.

The V5 design has a 16 A RCBO fuse system for the three high-current sockets, which deliver 3,680 W at 230 V or 1,840 W at 115 V.

This fuse system is a considerable improvement over a normal standard fuse because of its contact area. Because of its electrical function, a standard fuse has to have a very thin wire, and this also applies to expensive audiophile gold-plated versions. The IsoTek fuse system offers a contact area at least 1000 times larger, and a continuously strong connection.

KERP © (Kirchhoff's Equal Resistance Path) ensures equal resistance and equal current delivery to all outlets. The internal wiring is of the highest quality. It consists of a high-purity core of Ohno Continuous Cast solid silver-plated copper strands, which also offers low resistance at high current. A helix of fluorinated ethylene propylene (FEP) is then wound around the conductor, before an extruded FEP dielectric protects the conductor, creating a virtual dielectric of air (VDA). This construction delivers unrivalled performance and provides an ultimate internal power delivery system with very low resistance and extremely high performance. In addition, surge protection of 81,000 A is provided, protecting valuable equipment via IsoTek's unique sequential and repeatable protection system.

The internal wiring of IsoTek products works in synergy with the range of IsoTek power cables. An important but often overlooked aspect is maintaining commonality of design and material properties across cable looms. This applies both to signal-carrying cables and to the power cable network.

V5 Titan also has a System Link connection, which allows several units to be linked while maintaining a star-grounded reference, making multiple wall sockets unnecessary.

V5 Titan is a high-quality yet very functional design and an excellent upgrade for a complete audio system. IsoTek's award-winning Premier power cable is also included.

Features
  • Suitable for all audio and AV systems

  • RFI reduction 85dB (50 ohm standard), down to 5Hz

  • Optimised power-cleaning circuits remove common- and differential-mode mains noise

  • 3 independent high-current outlets for power amplifiers, subwoofers and active loudspeakers (16A)

  • Easy-to-reset RCBO fuse system

  • 153,500A surge protection

  • Fully star-grounded network

  • Internal wiring of solid silver-plated Ohno Continuous Cast copper core with FEP virtual air dielectric

  • SYSTEM LINK outlet for extending the outlets while maintaining a star-grounded reference

  • Supplied with IsoTek's award-winning EVO3 PREMIER POWER CABLE

  • UK, EU, US, AU & CH outlets available

IsoTek V5 Titan specifications

NUMBER OF OUTLETS
3 + System Link
OUTLET TYPE
UK, EU, US, AU & CH
MAINS CONNECTION
16A IEC C20
MAINS VOLTAGE
100-240V / 50-60Hz
HIGH CURRENT - 230V
x3 (16A 3,680W total)
HIGH CURRENT - 115V
x3 (16A 1,840W total)
SYSTEM LINK
x1
SURGE PROTECTION
153.000A
DIMENSIONS (W X H X D)
220 x 147 x 350mm
WEIGHT
12kg
Advice or a listening session

Would you like to hear this first? In our two listening rooms on Hoenderstraat in Maastricht, each with its own acoustics, we will set up the system for you. Make an appointment or call 043-7370028 — we are happy to help you find the right choice and the right placement.

Warranty

We guarantee that this product complies with the agreement, the specifications in the offer and the statutory provisions. Many brands also give their own warranty on their equipment. An additional warranty never limits your statutory rights: you can always rely on the law. Something wrong with your purchase? Contact us. Read more about warranty

  • Brand
  • Colour
  • Upgrade cable
Price
€ 4,799.00 € 4,799.00
Price per item Including VAT
Delivery time on request
Shipping · Returns · Warranty · General terms and conditions
Listening rooms
Audiofrenzy listening room in Maastricht

Come and listen

To make sure you make the right choice, we have set up two listening rooms, each with its own acoustics. Make an appointment and we will set up your ideal system — all you have to do is listen.

Make an appointment

Matching accessories

Accessories that go with this product.

Reviews
4,5

Very good — 48 reviews on Google

Neatly packed and shipped

Very satisfied with the service of this shop. I recently ordered a Rega phono amplifier and a matching cable, and they were shipped neatly packed.

Johan T.2025

Beautiful shop in the centre of Maastricht

Great repair service. Beautiful shop in the centre of Maastricht with great equipment and friendly, enthusiastic and knowledgeable staff / owners. I was helped very well.

Raymond B.2025

The owner closed the shop to help

I bought a second-hand soundbar from Audiofrenzy. The service is quick and friendly. I needed help getting the device into my car and the owner helped me straight away — he closed the shop to do so. Old-fashioned service and respect for the customer.

Jen V.May 2026

Read all reviews on Google

Why Audiofrenzy

At Audiofrenzy we believe that music only truly comes to life with the right equipment. Our specialists are happy to help you make the best choice for your system.

Expertise

Years of knowledge of high-end audio, translated into practical advice.

Quality

Every product is carefully checked before it is delivered to you.

Personal

Questions about a product or your system? Feel free to get in touch.